Home › Engine / Hybrid System › CRUISE CONTROL › FRONT RADAR SENSOR SYSTEM › 2020.03–2020.07
RM36W0E _51 Engine / Hybrid System _088664 CRUISE CONTROL _0425001 FRONT RADAR SENSOR SYSTEM U

CRUISE CONTROL  FRONT RADAR SENSOR SYSTEM  TERMINALS OF ECU  


CHECK MILLIMETER WAVE RADAR SENSOR ASSEMBLY


NOTICE:
·

Turning the ignition switch to ON with connectors disconnected may cause DTCs to be stored. Make sure to clear the DTCs after inspection has been performed.

·

Do not apply excessive force to the millimeter wave radar sensor assembly connector.



A402620E20
3.365,0.063 3.792,0.302 0.427,0.24 3.49,0.094 3.948,0.292 0.458,0.198 10 false B8

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
B8-8 (IGB) - B8-1 (SGND) Power source Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
B8-1 (SGND) - Body ground Ground Always Below 1 Ω