| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| B116149 | Airbag ECU (Main ASIC) Internal Electronic Failure | Airbag sensor assembly malfunction | ·
Auxiliary battery ·
Airbag sensor assembly |
Comes on | Does not apply to test/check mode |
If any DTCs other than B116049, B11609E, B116149, B11619E, B116311, B116349, B11639E, B11639F, B116449, B116483, B116484, B116485, B116549, B116583, B116584, B116585, B116800 and P05BB00 are also output, troubleshoot those DTCs first.
Check whether the auxiliary battery has recently been fully discharged (i.e. "dead").
| Result | Proceed to |
|---|---|
| Auxiliary battery has not been fully discharged recently | A |
| Auxiliary battery has been fully discharged recently | B |
A
B
Pre-procedure1
Turn the ignition switch to ON, and wait for at least 60 seconds.
Procedure1
Clear the DTCs stored in memory.
| Proceed to |
|---|
| NEXT |
Post-procedure1
Turn the ignition switch off.
NEXT
Pre-procedure1
Turn the ignition switch to ON, and wait for at least 60 seconds.
Procedure1
Check for DTCs.
If any DTCs other than B116049, B11609E, B116149, B11619E, B116311, B116349, B11639E,B11639F, B116449, B116483, B116484, B116485, B116549, B116583, B116584, B116585, B116800and P05BB00 are also output, troubleshoot those DTCs first.
| Result | Proceed to |
|---|---|
| B116149 is not output | A |
| B116149 is output | B |
Post-procedure1
None
A
B
According to the display on the GTS, check the freeze frame data item "IG Voltage".
| Result | Proceed to |
|---|---|
| "IG Voltage" is less than 8 V | A |
| "IG Voltage" is 8 V or more | B |
A
B