CHECK DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the blind spot monitor system on.
Turn the GTS on.
Check for DTCs by following the prompts on the GTS screen.
The blind spot monitor sensor RH and the blind spot monitor sensor LH both output DTCs. Therefore, check both blind spot monitor sensors for DTCs.
CLEAR DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the blind spot monitor system on.
Turn the GTS on.
Clear for DTCs by following the prompts on the GTS screen.
Clear the DTCs.