DESCRIPTION
Vehicle Control History is a function that captures and stores ECU data when triggered by specific vehicle behavior.
It may be possible to determine the cause of the malfunction by checking the vehicle history information and freeze frame data.
The number of possible stored Freeze Frame Data sets, whether multi Freeze Frame Data is available, the number of freeze frame points, Freeze Frame Data items, the ECU internal range, etc., is different depending on the stored group.
The stored data items for Vehicle Control History Freeze Frame Data are different depending on the stored group. When the value of a data item does not change across all points, only the value of the detection point will be displayed. The contents of the Freeze Frame Data is almost the same as that of the Data List.
PRECAUTIONS
As Vehicle Control History may be overwritten whenever the trigger conditions are met, make sure to save Vehicle Control History before performing any inspections.
As Vehicle Control History may be stored when performing an Active Test, learning, etc., make sure to clear the Vehicle Control History before returning the vehicle to the customer.
CHECK VEHICLE CONTROL HISTORY (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
Operate the GTS to enter the Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
*: Receive side ECU detects communication malfunction and may operate warning in multi-information display or indicator light.
CLEAR VEHICLE CONTROL HISTORY (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
Operate the GTS to enter the Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
Press the DTC clear button.
By performing this procedure, all stored Vehicle Control History items will be cleared.
CHECK VEHICLE CONTROL HISTORY (STEERING ANGLE SENSOR)
Operate the GTS to enter the Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
| Code | Tester Display | Measurement Item | Slip Indicator Light | Diagnostic Note |
|---|---|---|---|---|
| XF01B | ECU Security Key Not Registered | ECU security key has not been registered | * | ( )
|
*: Receive side ECU detects communication malfunction and may operate warning in multi-information display or indicator light.
CLEAR VEHICLE CONTROL HISTORY (STEERING ANGLE SENSOR)
Operate the GTS to enter the Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
Press the DTC clear button.
By performing this procedure, all stored Vehicle Control History items will be cleared.
VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)
A part of the control history can be confirmed using the vehicle control history.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>VEHICLE CONTROL HISTORY