Home › General › MAINTENANCE › REAR WIPER RUBBER
RM36W0E _V1 General _088300 MAINTENANCE _0425486 REAR WIPER RUBBER A

MAINTENANCE  REAR WIPER RUBBER  INSTALLATION  


PROCEDURE

Hide 85214R 1.INSTALL REAR WIPER RUBBER

a.
E358751

Install the 2 rear wiper rubber backing plates to the rear wiper rubber.

NOTICE:

Install the 2 rear wiper rubber backing plates facing the correct direction.



b.
E358752C01
1.333,1.25 1.625,1.115 true 1.167,1.177 1.365,1.354 0.198,0.177 10 false *a
*a Second Claw


Insert the rear wiper rubber with the 2 rear wiper rubber backing plates through the second claw from the front of the rear wiper blade and then push it through each claw until the rear claw.


c.
E358753C02
2.115,0.438 2.396,0.229 true 1.969,0.458 2.281,0.615 0.313,0.156 10 false *a
*a Stopper


After pushing the rear wiper rubber through the rear claw, pull it slightly over the rear stopper.


d.

Slide the rear wiper rubber through the front claw.


e.

Securely engage the rear wiper blade claw to the rear wiper rubber groove.

HINT:
E358754

·

If the front claw of the rear wiper blade is not in the rear wiper rubber groove, grasp the rear wiper rubber and slide it up and down multiple times to insert the claw into the groove.

·

Applying a small amount of window washer fluid to the rear wiper rubber can make it easier to insert the claw into the groove.




Hide 85242 2.INSTALL REAR WIPER BLADE

a.
E427642

Engage the claw to install the rear wiper blade.