Home › General › SPECIFICATIONS › CLUTCH › 2020.03–2020.07
RM36W0E _V1 General _087262 SPECIFICATIONS _0426673 CLUTCH F

SPECIFICATIONS  CLUTCH  TORQUE SPECIFICATIONS  


Clutch System
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Clutch release bleeder sub-assembly x Bleeder plug 8.4 86 74

Clutch Pedal
Part Tightened N*m kgf*cm ft.*lbf
Clutch pedal sub-assembly x Clutch pedal support sub-assembly 36.8 375 27
Clutch pedal support assembly x Vehicle body 12.7 130 9

Clutch Master Cylinder
Part Tightened N*m kgf*cm ft.*lbf
Clutch master cylinder assembly x Vehicle body 12.7 130 9
Clutch master cylinder to flexible hose tube x Clutch master cylinder assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10

Clutch Unit
Part Tightened N*m kgf*cm ft.*lbf
Clutch cover assembly x Flywheel sub-assembly 19.1 195 14
Clutch release cylinder with bearing assembly x Manual transaxle assembly 22.5 229 17
Clutch release cylinder to bleeder tube x Clutch release cylinder with bearing assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release bleeder sub-assembly x Manual transaxle assembly 16.7 170 12
Clutch release cylinder to bleeder tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Bleeder clutch release tube x Manual transaxle assembly 12 122 9
Bleeder clutch release tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10

Clutch Pedal Switch
Part Tightened N*m kgf*cm ft.*lbf
Clutch switch assembly x Clutch pedal support sub-assembly 15.7 160 12
Clutch start switch assembly x Clutch pedal support sub-assembly 15.7 160 12