Home › Engine / Hybrid System › M15A-FXE (EMISSION CONTROL) › EGR COOLER
RM36W0E _51 Engine / Hybrid System _088663 M15A-FXE EMISSION CONTROL _0427224 EGR COOLER A

M15A-FXE EMISSION CONTROL  EGR COOLER  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 25685 2.INSTALL NO. 1 EGR COOLER GASKET

a.
A463796C01
0.76,0.813 0.292,1.667 0.292,1.667 1.115,1.542 false 1.052,0.75 2.135,0.615 2.135,0.615 1.51,1.573 true 0.125,1.583 0.438,1.74 0.313,0.156 10 false *a 2.167,0.49 2.479,0.646 0.313,0.156 10 false *a
*a Claw


Install a new No. 1 EGR cooler gasket to the EGR cooler assembly.

NOTICE:

Make sure that the claws of the No. 1 EGR cooler gasket are toward the EGR cooler assembly side.



Hide 25680 3.INSTALL EGR COOLER ASSEMBLY

a.

Install the EGR cooler assembly to the EGR valve assembly with the 2 bolts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


Hide 5.INSTALL EGR VALVE WITH EGR COOLER ASSEMBLY