Home › Engine / Hybrid System › M15A-FXE (EMISSION CONTROL) › VACUUM SENSOR
RM36W0E _51 Engine / Hybrid System _088663 M15A-FXE EMISSION CONTROL _0427225 VACUUM SENSOR A

M15A-FXE EMISSION CONTROL  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 89421 1.INSTALL E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

a.

Install the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) to the intake manifold with the bolt.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


b.

Connect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.


c.

Connect the vacuum hose to the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor).