Home › Drivetrain › CLUTCH › CLUTCH UNIT (for C551) › from 2020.07
RM36W0E _52 Drivetrain _089426 CLUTCH _0430798 CLUTCH UNIT(for C551) G

CLUTCH  CLUTCH UNIT(for C551)  INSPECTION  


PROCEDURE

Hide 31250 1.INSPECT CLUTCH DISC ASSEMBLY

C062956

a.

Using a vernier caliper, measure the rivet head depth.

Minimum Rivet Head Depth:

0.3 mm (0.0118 in.)


If the rivet head depth is less than the minimum, replace the clutch disc assembly.


b.
F100379C01
0,0 0,0 false
V100135

Manual Transaxle Assembly Side


Install the clutch disc assembly to the manual transaxle assembly.

NOTICE:

Do not insert the clutch disc assembly in the wrong direction.



c.

Using a dial indicator, measure the clutch disc assembly runout.

Maximum Runout:

0.8 mm (0.0315 in.)


If the runout is more than the maximum, replace the clutch disc assembly.


Hide 31210 2.INSPECT CLUTCH COVER ASSEMBLY

C304477N01
1.125,0.302 1.354,0.51 0.229,0.208 10 false B 0.49,0.438 0.875,0.635 0.385,0.198 10 false A

a.

Using a vernier caliper, measure the depth and width of the diaphragm spring wear.

Maximum:

Depth (A): 0.5 mm (0.0197 in.)

Width (B): 6.0 mm (0.236 in.)


If the depth or width is more than the maximum, replace the clutch cover assembly.


Hide 13405 3.INSPECT FLYWHEEL SUB-ASSEMBLY

C062958

a.

Using a dial indicator, check the flywheel sub-assembly runout.

Maximum Runout:

0.1 mm (0.00394 in.)


If the runout is more than the maximum, replace the flywheel sub-assembly.


Hide 31230 4.INSPECT CLUTCH RELEASE BEARING ASSEMBLY

Q001060

a.

Check that the clutch release bearing assembly moves smoothly without abnormal resistance by turning the sliding parts of the clutch release bearing assembly (clutch cover assembly contacting surface) while applying force in the axial direction.

HINT:

The bearing is permanently lubricated and requires no cleaning or lubrication.



b.

Inspect the clutch release bearing assembly for damage and wear.

If necessary, replace the clutch release bearing assembly.