1.INSTALL RELEASE CYLINDER BLEEDER PLUG
Install the release cylinder bleeder plug to the release cylinder body.
04313
2.INSTALL CLUTCH RELEASE CYLINDER KIT
Install the release cylinder bleeder plug cap to the release cylinder bleeder plug.
|
Lithium Soap Base Glycol Grease |
Coat a new piston with lithium soap base glycol grease as shown in the illustration.
Install the piston and a new spring to the release cylinder body.
Do not damage the inside of the release cylinder body.
Install the smaller end of the spring to the piston.
Install a new boot to the push rod.
Install the boot and the push rod to the release cylinder body.