Home › Engine / Hybrid System › CRUISE CONTROL › SPEED LIMITER SYSTEM (for Gasoline Model) › from 2020.07
RM36W0E _51 Engine / Hybrid System _088664 CRUISE CONTROL _0431066 SPEED LIMITER SYSTEM(for Gasoline Model) U

CRUISE CONTROL  SPEED LIMITER SYSTEM(for Gasoline Model)  TERMINALS OF ECU  


CHECK ECM (for M15A-FKS)


A458815E06
1.781,0.156 2.198,0.458 0.417,0.302 5.385,0.188 5.802,0.49 0.417,0.302 1.865,0.219 2.375,0.438 0.51,0.219 10 false D51 5.469,0.25 5.979,0.469 0.51,0.219 10 false A54

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Terminal Description Condition Specified Condition
A54-10 (E1) - Body ground Ground Always Below 1 Ω
A54-29 (ASLM) - A54-10 (E1) Speed limiter switch signal Speed limiter switch on Below 1 Ω
Speed limiter switch off 10 kΩ or higher
A54-28 (ECCS) - A54-10 (E1) Steering pad switch circuit Always Below 1 Ω
A54-1 (BATT) - Body ground Power source circuit Always 11 to 14 V
A54-27 (CCS) - A54-28 (ECCS) Steering pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch pushed 228 to 252 Ω
+RES switch pushed 599 to 661 Ω
-SET switch pushed 1463 to 1617 Ω


CHECK ECM (for 1KR-FE)


A459240E02
2.323,0.26 2.781,0.563 0.458,0.302 5.417,0.25 5.875,0.552 0.458,0.302 2.427,0.323 2.885,0.521 0.458,0.198 10 false D50 5.521,0.313 5.979,0.51 0.458,0.198 10 false A55

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Terminal Description Condition Specified Condition
A55-4 (E1) - Body ground Ground Always Below 1 Ω
A55-27 (ASLM) - A55-4 (E1) Speed limiter switch signal Speed limiter switch on Below 1 Ω
Speed limiter switch off 10 kΩ or higher
A55-30 (ECCS) - A55-4 (E1) Steering pad switch circuit Always Below 1 Ω
A55-15 (BATT) - Body ground Power source circuit Always 11 to 14 V
A55-60 (CCS) - A55-30 (ECCS) Steering pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch pushed 228 to 252 Ω
+RES switch pushed 599 to 661 Ω
-SET switch pushed 1463 to 1617 Ω