Home › Engine / Hybrid System › 1KR-FE (FUEL) › FUEL PRESSURE REGULATOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _090956 1KR-FE FUEL _0431071 FUEL PRESSURE REGULATOR A

1KR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280J 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Make sure that the O-rings are not cut or pinched during installation.



c.

Install the No. 2 fuel suction support to the fuel suction tube with pump and gauge assembly.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY