Home › Engine / Hybrid System › 1KR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY › from 2020.07
RM36W0E _51 Engine / Hybrid System _090956 1KR-FE FUEL _0431073 FUEL SENDER GAUGE ASSEMBLY A

1KR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the 2 claws to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Engage the 3 clamps to connect the wire harness.

NOTICE:
·

Do not damage the wire harness.

·

When engaging each wire harness to the clamp, engage one wire at a time.




c.

Connect the fuel sender gauge assembly connector.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY