Home › Engine / Hybrid System › 1KR-FE (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _090964 1KR-FE EMISSION CONTROL _0431147 DIFFERENTIAL PRESSURE SENSOR A

1KR-FE EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 89481B 1.REMOVE DIFFERENTIAL PRESSURE SENSOR

a.
A467998

Disconnect the differential pressure sensor connector.


b.
A467999

Slide the clip and disconnect the vacuum transmitting hose assembly from the differential pressure sensor.


c.

Remove the bolt and differential pressure sensor from the sensor bracket.


d.
A468000

Remove the 2 bolts and sensor bracket from the cylinder head cover sub-assembly.


Hide 25760 2.REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY

a.
A468001

Slide the clip and remove the vacuum transmitting hose assembly from the No. 1 pipe.