Home › Engine / Hybrid System › 1KR-FE (EMISSION CONTROL) › PURGE VALVE › from 2020.07
RM36W0E _51 Engine / Hybrid System _090964 1KR-FE EMISSION CONTROL _0431151 PURGE VALVE A

1KR-FE EMISSION CONTROL  PURGE VALVE  INSTALLATION  


PROCEDURE

Hide 17650G 1.INSTALL PURGE VALVE (PURGE VSV)

a.

Install the purge valve (purge VSV) to the No. 1 EGR pipe sub-assembly with the bolt.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)


b.

Connect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose to the purge valve (purge VSV) and slide the 2 clips to secure them.

A426659C01
3.635,1.521 3.792,1.385 3.792,1.385 3.979,1.385 true 3.396,1.875 3.26,2.094 3.26,2.094 3.26,2.333 true 1.302,2.208 1.302,1.844 true 5.448,2.25 5.448,1.885 true 4,1.281 4.208,1.458 0.208,0.177 10 true *1 3.188,2.354 3.385,2.531 0.198,0.177 10 false *2 5.552,1.219 5.771,1.458 0.219,0.24 10 false *a 1.469,1.177 1.646,1.375 0.177,0.198 10 false *b 2.24,1.49 2.427,1.667 0.188,0.177 10 false *c 5.719,1.51 5.917,1.698 0.198,0.188 10 false *d 2.49,1.729 2.698,1.906 0.208,0.177 10 false *e 6.219,1.073 6.427,1.25 0.208,0.177 10 false *f 1.208,2.188 1.417,2.427 0.208,0.24 10 false *g 5.375,2.229 5.583,2.469 0.208,0.24 10 false *g
*1 No. 1 Fuel Vapor Feed Hose *2 No. 2 Fuel Vapor Feed Hose
*a 0 to 3 mm (0 to 0.118 in.) *b 2 to 5 mm (0.0787 to 0.197 in.)
*c 180° *d 120°
*e Rear *f Up
*g Paint Mark - -


HINT:

Engage the clip within the area shown in the illustration.



c.

Connect the purge valve (purge VSV) connector.