Home › Engine / Hybrid System › 1KR-FE (COOLING) › RELAY › from 2020.07
RM36W0E _51 Engine / Hybrid System _091037 1KR-FE COOLING _0431362 RELAY G

1KR-FE COOLING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT FAN NO. 1 RELAY

E209082

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the FAN No. 1 relay.



Hide 85927A 2.INSPECT FAN NO. 2 RELAYx

A159206E23
2.302,0.625 2.396,0.188 2.396,0.188 2.5,0.188 false 2.625,0.74 2.844,0.469 2.844,0.469 2.948,0.469 false 2.479,1.125 3.063,1.125 false 2.469,1.625 3.094,1.625 false 2.031,0.667 1.823,0.396 1.823,0.396 1.698,0.396 false 0.188,0.927 0.313,1.104 0.125,0.177 10 false 5 0.188,1.323 0.313,1.5 0.125,0.177 10 false 1 0.688,0.396 0.844,0.573 0.156,0.177 10 false 4 1.177,0.906 1.333,1.083 0.156,0.177 10 false 3 1.167,1.313 1.323,1.49 0.156,0.177 10 false 2 1.563,0.323 1.688,0.5 0.125,0.177 10 false 1 2.531,0.104 2.688,0.281 0.156,0.177 10 false 4 3.01,0.396 3.167,0.573 0.156,0.177 10 false 2 3.125,1.552 3.26,1.719 0.135,0.167 10 false 3 3.104,1.042 3.26,1.219 0.156,0.177 10 false 5

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage not applied Below 1 Ω
Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the FAN No. 2 relay.