Home › Engine / Hybrid System › 1KR-FE (LUBRICATION) › OIL PRESSURE SWITCH › from 2020.07
RM36W0E _51 Engine / Hybrid System _091047 1KR-FE LUBRICATION _0431395 OIL PRESSURE SWITCH G

1KR-FE LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the engine oil pressure switch connector.


b.

Start the engine.


c.
A159695

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Switch body Idling 10 kΩ or higher
Engine stopped Below 1 Ω



d.

Reconnect the engine oil pressure switch connector.

If the result is not as specified, replace the engine oil pressure switch assembly.