Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431469 CAMSHAFT OIL CONTROL VALVE A

1KR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 11101J 1.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

a.
A468328

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal surface of the camshaft timing oil control valve assembly (connecting surface with the cylinder head sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A425985C01
1.594,1.823 1.594,1.354 false 1.531,1.823 1.844,1.979 0.313,0.156 10 false *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.


Hide 11101J 2.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

a.
A425357

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal surface of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A425986C01
1.594,1.771 1.594,1.365 false 1.531,1.771 1.844,1.927 0.313,0.156 10 false *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.