Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431472 ACCELERATOR PEDAL G

1KR-FE ENGINE CONTROL  ACCELERATOR PEDAL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 78110K 1.INSPECT ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Data List / Accelerator Position Sensor. No.1 Voltage % and Accelerator Position Sensor. No.2 Voltage %.

Powertrain > Engine > Data List
Tester Display
Accelerator Position Sensor No.1 Voltage %
Accelerator Position Sensor No.2 Voltage %
50003 372 256,257

e.

Read the values displayed on the GTS.

Standard Percentage:
Tester Display Condition Specified Condition
Accelerator Position Sensor. No.1 Voltage % Accelerator pedal fully released 10 to 22%
Accelerator pedal fully depressed 52 to 90%
Accelerator Position Sensor. No.2 Voltage % Accelerator pedal fully released 24 to 40%
Accelerator pedal fully depressed 68 to 95%


If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.