Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431473 CAMSHAFT POSITION SENSOR A

1KR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11101E 1.INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A231950C04
1.708,0.51 1.427,0.198 1.427,0.198 1.167,0.198 false 0.979,0.115 1.292,0.313 0.313,0.198 10 false *a
*a O-ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

NOTICE:

If reusing the camshaft position sensor, be sure to inspect the O-ring.



b.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
7.7 N*m (79 kgf*cm, 68 in.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place during installation.




c.

Connect the camshaft position sensor connector.


Hide 11101E 2.INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A231950C04
1.708,0.51 1.427,0.198 1.427,0.198 1.167,0.198 false 0.979,0.115 1.292,0.313 0.313,0.198 10 false *a
*a O-ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

NOTICE:

If reusing the camshaft position sensor, be sure to inspect the O-ring.



b.

Install the camshaft position sensor to the cylinder head sub-assembly with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place during installation.




c.

Connect the camshaft position sensor connector.


Hide 3.INSTALL AUXILIARY BATTERY