11301K
1.INSPECT CRANKSHAFT POSITION SENSOR (w/o Stop And Start System)
| *a | Component without harness connected
(Crankshaft Position Sensor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Cold | 1630 to 2740 Ω |
| Hot | 2065 to 3225 Ω |
In the table above, the terms "Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).
If the result is not as specified, replace the crankshaft position sensor.