Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431474 CRANKSHAFT POSITION SENSOR A

1KR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11301K 1.REMOVE CRANKSHAFT POSITION SENSOR

a.
A468339

Disconnect the crankshaft position sensor connector.


b.
A468340

Remove the bolt and crankshaft position sensor from the timing chain cover sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.