Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431475 IGNITION COIL AND SPARK PLUG A

1KR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 17882 1.SEPARATE NO. 2 AIR CLEANER HOSE

a.
A478827

Remove the 2 bolts.


b.

Slide the clip of the No. 2 ventilation hose.


c.

Loosen the hose clamp to separate the No. 2 air cleaner hose from the No. 3 air cleaner hose.


Hide 19500D 2.REMOVE NO. 1 IGNITION COIL

a.
A468342

Disconnect the 3 No. 1 ignition coil connectors.


b.

Remove the 3 bolts and 3 No. 1 ignition coils from the cylinder head cover sub-assembly.

NOTICE:

If a No. 1 ignition coil has been struck or dropped, replace it.


HINT:

Arrange the removed parts in the correct order.



Hide 19100P 3.REMOVE SPARK PLUG