Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431475 IGNITION COIL AND SPARK PLUG A

1KR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  INSTALLATION  


PROCEDURE

Hide 19100P 1.INSTALL SPARK PLUG

Hide 19500D 2.INSTALL NO. 1 IGNITION COIL

a.

Install the 3 No. 1 ignition coils to the cylinder head cover sub-assembly with the 3 bolts.

Torque:
8.9 N*m (91 kgf*cm, 79 in.*lbf)

NOTICE:

If a No. 1 ignition coil has been struck or dropped, replace it.


HINT:

Install the same parts to their original positions.



b.

Connect the 3 No. 1 ignition coil connectors.


Hide 17882 3.CONNECT NO. 2 AIR CLEANER HOSE

a.

Install the No. 2 air cleaner hose to the No. 3 air cleaner hose and tighten the hose clamp.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


b.

Slide the clip to secure the No. 2 ventilation hose.

NOTICE:

Make sure to position the clip as shown in the illustration.



c.

Install the No. 2 air cleaner hose to the cylinder head cover sub-assembly with the 2 bolts.

Torque:
7.8 N*m (80 kgf*cm, 69 in.*lbf)