Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › HEATED OXYGEN SENSOR (for Sensor 1) › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431478 HEATED OXYGEN SENSOR(for Sensor 1) A

1KR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR(for Sensor 1)  REMOVAL  


PROCEDURE

Hide 89465 1.REMOVE HEATED OXYGEN SENSOR

a.
A468358

Disconnect the heated oxygen sensor connector.


b.

Disengage the 2 wire harness clamps.


c.
A468359N01
1.104,1.063 1.51,1.063 true 0.781,0.979 1.125,1.198 0.344,0.219 10 true SST

Using SST, remove the heated oxygen sensor from the exhaust manifold.

SST
09224-00012  

NOTICE:

If the heated oxygen sensor has been struck or dropped, replace it.