Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › HEATED OXYGEN SENSOR (for Sensor 2) › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431479 HEATED OXYGEN SENSOR(for Sensor 2) A

1KR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR(for Sensor 2)  REMOVAL  


PROCEDURE

Hide 89465A 1.REMOVE HEATED OXYGEN SENSOR

a.
A468361

Disconnect the heated oxygen sensor connector.


b.

Disengage the 2 wire harness clamps.


c.
A470305N02
1.448,0.438 1.604,0.188 1.604,0.188 1.823,0.188 true 1.823,0.104 2.281,0.302 0.458,0.198 10 true SST

Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST
09224-00012  

NOTICE:

If the heated oxygen sensor has been struck or dropped, replace it.