Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH › 2020.07–2020.09
RM36W0E _59 Vehicle Exterior _088018 WINDOW / GLASS _0424521 FRONT PASSENGER SIDE POWER WINDOW SWITCH G

WINDOW / GLASS  FRONT PASSENGER SIDE POWER WINDOW SWITCH  INSPECTION  


PROCEDURE

Hide 84810 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LHD)

a.

Check the resistance.

i.
B563160C10
1.427,0.302 1.844,0.552 0.417,0.25 0.75,1.573 1.135,1.24 true 1.25,1.667 1.302,1.24 true 1.698,1.625 1.625,1.24 true 2.094,1.635 1.802,1.24 true 0.521,0.458 0.833,0.615 0.313,0.156 10 false *a 0.375,1.594 0.875,1.76 0.5,0.167 10 false AUTO 0.969,1.677 1.365,1.854 0.396,0.177 10 false GND 1.625,1.688 1.885,1.854 0.26,0.167 10 false UP 2.063,1.677 2.583,1.833 0.521,0.156 10 false DOWN 1.521,0.344 1.833,0.5 0.313,0.156 10 false K13
*a Component without harness connected
(Power Window Regulator Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K13-5 (UP) - K13-7 (GND) Auto up or up position Below 100 Ω
K13-4 (DOWN) - K13-7 (GND) Auto down or down position Below 100 Ω
K13-8 (AUTO) - K13-7 (GND) Auto up or auto down position Below 100 Ω
K13-5 (UP) - K13-7 (GND) Off 10 kΩ or higher
K13-4 (DOWN) - K13-7 (GND) Off 10 kΩ or higher
K13-8 (AUTO) - K13-7 (GND) Off 10 kΩ or higher


If the result is not as specified, replace the power window regulator switch assembly.



Hide 84810 2.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RHD)

a.

Check the resistance.

i.
B563160C01
1.427,0.302 1.844,0.552 0.417,0.25 0.75,1.573 1.135,1.24 true 1.25,1.667 1.302,1.24 true 1.698,1.625 1.625,1.24 true 2.094,1.635 1.802,1.24 true 0.521,0.458 0.833,0.615 0.313,0.156 10 false *a 0.375,1.594 0.875,1.76 0.5,0.167 10 false AUTO 0.969,1.677 1.365,1.854 0.396,0.177 10 false GND 1.625,1.688 1.885,1.854 0.26,0.167 10 false UP 2.063,1.677 2.583,1.833 0.521,0.156 10 false DOWN 1.552,0.354 1.865,0.51 0.313,0.156 10 false L6
*a Component without harness connected
(Power Window Regulator Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L6-5 (UP) - L6-7 (GND) Auto up or up position Below 100 Ω
L6-4 (DOWN) - L6-7 (GND) Auto down or down position Below 100 Ω
L6-8 (AUTO) - L6-7 (GND) Auto up or auto down position Below 100 Ω
L6-5 (UP) - L6-7 (GND) Off 10 kΩ or higher
L6-4 (DOWN) - L6-7 (GND) Off 10 kΩ or higher
L6-8 (AUTO) - L6-7 (GND) Off 10 kΩ or higher


If the result is not as specified, replace the power window regulator switch assembly.