85110
1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)
for LH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
| *a | Alignment Mark |
Check the automatic stop (park) position.
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The front wiper stops at the position shown in the illustration.
for RH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
| *a | Alignment Mark |
Check the automatic stop (park) position.
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The front wiper stops at the position shown in the illustration.
85110
2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)
for LH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
| *a | Alignment Mark |
Check the automatic stop (park) position.
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The front wiper stops at the position shown in the illustration.
for RH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
| *a | Alignment Mark |
Check the automatic stop (park) position.
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The front wiper stops at the position shown in the illustration.