1.REMOVE FRONT WHEEL RH
53875A
2.REMOVE FRONT FENDER LINER RH (w/ Engine Under Cover Assembly)
for TMC Made:
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to separate the retainer.
Remove the 7 screws and 7 clips.
| *a | Screw | *b | Clip |
Remove the 3 grommets and front fender liner RH.
for TMMF Made:
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to separate the retainer.
Remove the 6 screws and 7 clips.
| *a | Screw | *b | Clip |
Remove the 2 grommets and front fender liner RH.
3.DRAIN WASHER FLUID
Disconnect the front washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
Use a container to collect the washer fluid.
85310
4.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (w/ Rear Wiper)
Disconnect the washer hose.
Disconnect the connector.
Remove the windshield washer motor and pump assembly.
85310
5.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (w/o Rear Wiper)
Disconnect the connector.
Remove the windshield washer motor and pump assembly.