1.REMOVE FRONT WHEEL
2.DRAIN BRAKE FLUID
Immediately wash off any brake fluid that comes into contact with any painted surfaces.
3.SEPARATE FRONT FLEXIBLE HOSE
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
47715A
4.LOOSEN FRONT DISC BRAKE CYLINDER SLIDE PIN
Remove the 2 slide pin caps.
Using a socket hexagon 7 mm, loosen the 2 front disc brake cylinder slide pins.
47730
5.REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY
Remove the 2 bolts and remove the front disc brake cylinder assembly with front disc brake cylinder mounting from the steering knuckle.
47748
6.REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING
Remove the front disc brake anti-rattle spring from the front disc brake cylinder assembly.
7.REMOVE FRONT DISC BRAKE PAD
Remove the brake pad from the front disc brake cylinder mounting.
47750
8.REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY
Using a socket hexagon 7 mm, remove the 2 slide pins and remove the front disc brake cylinder assembly.
9.REMOVE FRONT DISC BRAKE BUSH DUST BOOT
Remove the 2 dust boots from the front disc brake cylinder assembly.
43512
10.REMOVE FRONT DISC
| *a | Matchmark |
Place matchmarks on the disc and axle hub and remove the disc.