1.REMOVE FRONT DISC BRAKE PISTON
| *a | Cloth |
Place a piece of cloth between the front brake piston and front disc brake cylinder.
Apply compressed air to remove the front brake piston from the disc brake cylinder.
Do not place your fingers in front of the piston when applying compressed air.
Do not spatter the brake fluid.
2.REMOVE CYLINDER BOOT
| *a | Protective tape |
Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the front disc brake cylinder.
Be careful not to damage the front disc brake cylinder.
3.REMOVE PISTON SEAL
| *a | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the front disc brake cylinder.
Do not damage the inner surface or piston seal groove of the front disc brake cylinder.
4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP
Remove the front disc brake bleeder plug cap from the front disc brake bleeder plug.
5.REMOVE FRONT DISC BRAKE BLEEDER PLUG
Remove the front disc brake bleeder plug from the front disc brake cylinder.