Home › General › MAINTENANCE › FRONT DISC BRAKE PAD (for TMMF Made) › 2020.07–2021.11
RM36W0E _V1 General _088300 MAINTENANCE _0432148 FRONT DISC BRAKE PAD(for TMMF Made) A

MAINTENANCE  FRONT DISC BRAKE PAD(for TMMF Made)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.INSTALL FRONT DISC BRAKE PAD

a.

Install the brake pad to the disc brake cylinder mounting and front disc brake cylinder assembly.


Hide 47750 2.INSTALL DISC BRAKE CYLINDER ASSEMBLY

a.
C437937C02
0,0 0,0 false
V100155

Lithium Soap Base Glycol Grease


Apply lithium soap base glycol grease to the slide pins.


b.

Using a socket hexagon 7 mm, install the disc brake cylinder assembly with the 2 front disc brake cylinder slide pins.

Torque:
27.5 N*m (280 kgf*cm, 20 ft.*lbf)


c.

Install the 2 slide pin caps.


Hide 47748 3.INSTALL FRONT DISC BRAKE ANTI-RATTLE SPRING

C437943C01
2.24,1.115 2.469,1.333 0.229,0.219 10 true *a 1.292,0.521 1.479,0.729 0.188,0.208 10 true *b
*a Sliding Arm A'
*b End A


a.

Push end A of the front disc brake anti-rattle spring into the groove of the disc brake cylinder and install front disc brake anti-rattle spring sliding arm A' onto the disc brake cylinder mounting anchor.


b.
C437944C01
1.24,0.375 1.521,0.615 0.281,0.24 10 true *a
*a End B


Push the front disc brake anti-rattle spring in the direction of the arrow to flex it until end B can be inserted into the groove of the disc brake cylinder.


c.
C437945C01
2.302,0.313 2.531,0.5 0.229,0.188 10 true *a 1.063,0.698 1.292,0.885 0.229,0.188 10 true *b
*a Sliding Arm B'
*b End B


While pushing end B of the front disc brake anti-rattle spring into the groove of the disc brake cylinder, flex front disc brake anti-rattle spring sliding arm B' and install arm B' onto the disc brake cylinder mounting anchor.


d.
C437942

Make sure that the front disc brake anti-rattle spring is securely installed.


Hide 4.INSTALL FRONT WHEEL