Home › General › SPECIFICATIONS › 1KR-FE STARTING › from 2020.07
RM36W0E _V1 General _087262 SPECIFICATIONS _0432153 1KR-FE STARTING F

SPECIFICATIONS  1KR-FE STARTING  TORQUE SPECIFICATIONS  


Starter Assembly (w/ Stop And Start System)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Starter commutator end frame x Starter drive housing assembly 6.4 65 57
Magnet starter switch assembly x Starter drive housing assembly 3.8 39 34
Wire harness x Terminal 45 8.0 82 71
Wire harness clamp bracket x Starter assembly 10 102 7
Starter assembly x Cylinder block sub-assembly 46 469 34
Terminal 30 x Engine wire 9.8 100 87
Air cleaner cap with air cleaner hose x Throttle body with motor assembly 3.0 31 27

Starter Assembly (w/o Stop And Start System)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Starter commutator end frame x Starter drive housing assembly 6.4 65 57
Magnet starter switch assembly x Starter drive housing assembly 3.8 39 34
Wire harness x Terminal 45 8.0 82 71
Wire harness clamp bracket x Starter assembly 10 102 7
Starter assembly x Cylinder block sub-assembly 46 469 34
Terminal 30 x Engine wire 9.8 100 87
Air cleaner cap with air cleaner hose x Throttle body with motor assembly 3.0 31 27