33321A
1.REMOVE REAR OUTPUT SHAFT BEARING
Using SST and a press, remove the rear output shaft bearing.
33335
2.INSPECT 1ST GEAR THRUST CLEARANCE
33332
3.INSPECT 2ND GEAR THRUST CLEARANCE
33335
4.INSPECT 1ST GEAR RADIAL CLEARANCE
33332
5.INSPECT 2ND GEAR RADIAL CLEARANCE
33428A
6.REMOVE COUNTER 5TH GEAR SHAFT SNAP RING
Using 2 screwdrivers and a hammer, remove the counter 5th gear shaft snap ring from the output shaft.
Use a piece of cloth to prevent the snap ring from flying off.
33422B
7.REMOVE 4TH DRIVEN GEAR
Using a press, remove the 5th driven gear and 4th driven gear from the output shaft.
33431B
8.REMOVE OUTPUT SHAFT SPACER
Remove the output shaft spacer from the output shaft.
33332
9.REMOVE 2ND GEAR
Using SST and a press, remove the 3rd driven gear and 2nd gear from the output shaft.
33332B
10.REMOVE 2ND GEAR NEEDLE ROLLER BEARING
Remove the 2nd gear needle roller bearing from the output shaft.
33332C
11.REMOVE 2ND GEAR BEARING SPACER
Remove the 2nd gear bearing spacer from the output shaft.
33038E
12.REMOVE 2ND SYNCHRONIZER RING
Remove the 2nd gear synchronizer ring from the reverse gear.
33361B
13.REMOVE NO. 1 CLUTCH HUB SHAFT SNAP RING
Using 2 screwdrivers, remove the No. 1 clutch hub shaft snap ring from the output shaft.
Do not damage the journal surface of the output shaft.
33335
14.REMOVE 1ST GEAR
Using a press, remove No. 1 transmission clutch hub and the 1st gear from the output shaft.
33335C
15.REMOVE 1ST GEAR NEEDLE ROLLER BEARING
Remove the 1st gear needle roller bearing from the output shaft.
33321N
16.REMOVE FRONT OUTPUT SHAFT BEARING
Using SST and a press, remove the front output shaft bearing from the output shaft.
33361
17.REMOVE NO. 1 TRANSMISSION CLUTCH HUB
Remove the 2 No. 1 clutch hub shifting key springs, 3 No. 1 clutch hub shifting keys and reverse gear from the No. 1 transmission clutch hub.