Home › Drivetrain › C551 (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT AND SELECT LEVER SHAFT › from 2020.07
RM36W0E _52 Drivetrain _091208 C551 MANUAL TRANSMISSION / TRANSAXLE _0432182 SHIFT AND SELECT LEVER SHAFT A

C551 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33251A 1.REMOVE INNER NO. 1 SHIFT LEVER (w/o Stop and Start System)

a.
D005787

Using a 5 mm pin punch and hammer, remove the inner No. 1 shift lever slotted pin from the shift and select lever shaft.

HINT:

Check the orientation of the inner No. 1 shift lever.



b.
D005789

Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

HINT:

Use a piece of cloth to prevent the snap ring from flying off.



c.
C313899

Remove the inner No. 1 shift lever and shift interlock plate from the shift and select lever shaft.


Hide 33251A 2.REMOVE INNER NO. 1 SHIFT LEVER (w/ Stop and Start System)

a.
C309303

Using a 5 mm pin punch and hammer, remove the inner No. 1 shift lever slotted pin from the shift and select lever shaft.

HINT:

Check the orientation of the inner No. 1 shift lever.



b.
C309304

Remove the inner No. 1 shift lever and shift interlock plate from the shift and select lever shaft.


Hide 33293G 3.REMOVE LOCK BALL HOLDER

a.
U161036

Remove the lock ball holder from the shift interlock plate.


b.

Remove the lock ball pin and spring from the lock ball holder.


Hide 33276F 4.REMOVE SELECT RETURN COMPRESSION SPRING

a.
F100240

Remove the select return compression spring from the shift and select lever shaft.


Hide 33277 5.REMOVE NO. 2 SELECT SPRING SEAT

a.
F100241

Remove the No. 2 select spring seat from the shift and select lever shaft.


Hide 33262E 6.REMOVE SELECT LEVER SHAFT

a.
C245805

Remove the bolt and pull out the select lever shaft from the control shaft cover.


Hide 33256 7.REMOVE SELECT INNER LEVER

a.
C058753

Remove the select inner lever from the control shaft cover.


Hide 33261C 8.REMOVE SHIFT AND SELECT LEVER SHAFT

a.
F100234C04
0.848,0.407 1.175,0.665 false 0.651,0.282 0.911,0.487 0.260,0.205 10 *a
*a Rope or equivalent


Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

HINT:
·

Lifting the control shaft cover up with a piece of rope or the equivalent makes the work easier.

·

Use a piece of cloth to prevent the snap ring from flying off.




b.
F100243

Remove the shift and select lever shaft with the shift lever boot from the control shaft cover.


c.

Remove the shift lever boot from the shift and select lever shaft.


Hide 33262F 9.REMOVE SELECT LEVER SHAFT OIL SEAL

a.
U161149C01
2.57,0.819 2.740,0.980 0.170,0.161 10 *a 2.271,0.542 2.534,0.902 false
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, pry out the select lever shaft oil seal from the control shaft cover.

NOTICE:

Be careful not to damage the installation surfaces of the control shaft cover.



Hide 33528C 10.REMOVE CONTROL SHAFT COVER OIL SEAL

a.
U161150C01
1.385,0.406 1.667,0.698 false 1.208,0.271 1.375,0.427 0.167,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, pry out the control shaft cover oil seal from the control shaft cover.

NOTICE:

Be careful not to damage the installation surfaces of the control shaft cover.