Home › Power Source / Network › 1KR-FE (BATTERY / CHARGING) › BATTERY CURRENT SENSOR › from 2020.07
RM36W0E _57 Power Source / Network _090846 1KR-FE BATTERY / CHARGING _0432214 BATTERY CURRENT SENSOR A

1KR-FE BATTERY / CHARGING  BATTERY CURRENT SENSOR  REMOVAL  


PROCEDURE

Hide 28850C 1.REMOVE BATTERY CURRENT SENSOR ASSEMBLY

a.
A464150

Remove the nut and disconnect the engine wire from the battery current sensor assembly.


b.
A464151

Loosen the nut and remove the battery current sensor assembly from the battery.


c.
A464152

Disconnect the battery current sensor assembly connector.


d.
A464153

Disengage the 2 claws to remove the battery state sensor assembly from the battery current sensor holder.