Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › ACOUSTIC VEHICLE ALERTING SYSTEM › from 2020.07
RM36W0E _59 Vehicle Exterior _091206 ACOUSTIC VEHICLE ALERTING SYSTEM _0432211 ACOUSTIC VEHICLE ALERTING SYSTEM D

ACOUSTIC VEHICLE ALERTING SYSTEM  ACOUSTIC VEHICLE ALERTING SYSTEM  OPERATION CHECK  


VEHICLE PROXIMITY NOTIFICATION SYSTEM OPERATION CHECK


a.

System operation check (vehicle stopped)

i.

Apply the parking brake.


ii.

Turn the ignition switch to ON.


iii.

With the brake pedal depressed, confirm that the vehicle proximity notification system does not operate (produce a sound) when the shift lever is moved from P to N.


iv.

When the brake pedal is released, confirm that the vehicle proximity notification system operates for approximately 3 seconds (produces a sound).



b.

System operation check (vehicle being driven)

i.

Turn the ignition switch to ON (READY).


ii.

Operate the EV drive mode switch (combination switch assembly) and drive the vehicle using EV drive mode.


iii.

When the shift lever is moved from P to D, confirm that the vehicle proximity notification system operates (produces a sound) when the vehicle is driven at speeds of 25 km/h (16 mph) or less using EV drive mode.