Home › General › SPECIFICATIONS › 1KR-FE BATTERY / CHARGING › from 2020.07
RM36W0E _V1 General _087262 SPECIFICATIONS _0432219 1KR-FE BATTERY / CHARGING F

SPECIFICATIONS  1KR-FE BATTERY / CHARGING  TORQUE SPECIFICATIONS  


GENERATOR WITH REGULATOR ASSEMBLY (for 80 A Type)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame 2.2 22 19
Generator coil assembly x Generator drive end frame 5.6 57 50
Generator brush holder assembly x Generator coil assembly 1.8 18 16
Generator rear end cover x Generator coil assembly 4.6 47 41
Generator pulley with clutch x Generator rotor assembly with SST 64 653 47
without SST 80 816 59
Wire harness clamp bracket x Generator with regulator assembly 10 102 7
Generator with regulator assembly x Cylinder block Bolt (A) 54 551 40
Bolt (B) 34 347 25
Wire harness x Terminal B 9.8 100 87

GENERATOR WITH REGULATOR ASSEMBLY (for 100 A Type)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame 2.2 22 19
Generator coil assembly x Generator drive end frame 5.6 57 50
Generator brush holder assembly x Generator coil assembly 1.8 18 16
Generator rear end cover x Generator coil assembly 4.6 47 41
Generator pulley with clutch x Generator rotor assembly with SST 64 653 47
without SST 80 816 59
Wire harness clamp bracket x Generator with regulator assembly 10 102 7
Generator with regulator assembly x Cylinder block Bolt (A) 54 551 40
Bolt (B) 34 347 25
Wire harness x Terminal B 9.8 100 87

AUXILIARY BATTERY
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
No. 2 Battery Clamp x Battery clamp sub-assembly 15.4 157 11
Positive (+) auxiliary battery cable x Battery terminal 5.6 57 50
Negative (-) auxiliary battery cable x Battery terminal 5.4 55 48

BATTERY CURRENT SENSOR
Part Tightened N*m kgf*cm in.*lbf
Battery current sensor assembly x Battery 5.4 55 48
Engine wire x Battery current sensor assembly 7.6 77 67