Home › Power Source / Network › M15A-FKS (BATTERY / CHARGING) › BATTERY CURRENT SENSOR › from 2020.07
RM36W0E _57 Power Source / Network _087763 M15A-FKS BATTERY / CHARGING _0432224 BATTERY CURRENT SENSOR A

M15A-FKS BATTERY / CHARGING  BATTERY CURRENT SENSOR  INSTALLATION  


PROCEDURE

Hide 28850C 1.INSTALL BATTERY CURRENT SENSOR ASSEMBLY

a.

Engage the 2 claws and install the battery state sensor assembly to the battery current sensor holder.


b.

Install the battery current sensor assembly to the battery and tighten the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.

Connect the engine wire to the battery current sensor assembly with the nut.

Torque:
7.6 N*m (77 kgf*cm, 67 in.*lbf)


d.

Connect the battery current sensor assembly connector.