Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (for HV Model LHD) › from 2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0432263 BRAKE MASTER CYLINDER(for HV Model LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for HV Model LHD)  DISASSEMBLY  


PROCEDURE

Hide 47201C 1.REMOVE BRAKE MASTER CYLINDER RING PIN

a.

Secure the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.
C436714

Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.



Hide 47220D 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.

Remove the brake master cylinder reservoir assembly from the brake master cylinder body.


Hide 47255 3.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.
C436715

Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.


b.

Remove the brake master cylinder body from the vise.


Hide 47230 4.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.


Hide 47299 5.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER

a.

Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.