47220D
1.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
Mount the brake master cylinder sub-assembly in a vise.
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.
Do not drop the brake master cylinder reservoir assembly.
Remove the brake master cylinder body from the vise.
2.REMOVE MASTER CYLINDER RESERVOIR GROMMET
Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.
47230
3.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.