83390H
1.INSTALL VACUUM WARNING SWITCH ASSEMBLY (w/ Vacuum Warning Switch)
Install a new check valve grommet to the brake booster assembly.
| *A | for TMC Made |
| *B | for TMMF Made |
| *a | 45° +/- 20° |
| *b | 32° +/- 5° |
| *c | Up |
Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.
89420H
2.INSTALL VACUUM SENSOR ASSEMBLY (w/ Vacuum Sensor)
Install a new vacuum sensor grommet to the brake booster assembly.
| *a | 32° +/- 5° |
| *b | Up |
Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.
44730
3.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY
Install a new check valve grommet to the brake booster assembly.
for TMC Made:
| *a | 60° +/- 5° |
| *b | Up |
Install the brake vacuum check valve assembly to the brake booster assembly as shown in the illustration.
for TMMF Made:
| *A | for M15A-FKS |
| *B | for 1KR-FE |
| *a | 25° +/- 10° |
| *b | 30° +/- 10° |
| *c | Up |
Install the brake vacuum check valve assembly to the brake booster assembly as shown in the illustration.