Home › Engine / Hybrid System › 1KR-FE (STARTING) › STARTER (w/ Stop And Start System) › from 2020.07
RM36W0E _51 Engine / Hybrid System _091207 1KR-FE STARTING _0432155 STARTER(w/ Stop And Start System) A

1KR-FE STARTING  STARTER(w/ Stop And Start System)  DISASSEMBLY  


PROCEDURE

Hide 28150 1.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A348907

Remove the nut to disconnect the wire harness from the terminal 45.


b.
A351839

Using "TORX" socket wrench T20, remove the 2 bolts and magnet starter switch assembly from the starter drive housing assembly.


c.
A352311

Remove the return spring from the starter pinion drive lever.


Hide 28130 2.REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY

a.
A469396

Remove the 2 through bolts.


b.
A352254C02
0.354,1.667 0.354,1.417 false 0.917,0.781 1.156,0.781 false 0.844,3.094 0.844,2.844 false 1.417,2.948 1.417,2.708 false 1.729,2.74 1.729,2.49 false 2.74,2.667 2.74,2.427 false 1.177,0.698 1.333,0.875 0.156,0.177 10 false *2 0.271,1.688 0.427,1.865 0.156,0.177 10 false *1 0.76,3.146 0.917,3.323 0.156,0.177 10 false *3 1.323,2.979 1.479,3.156 0.156,0.177 10 false *4 1.646,2.75 1.802,2.927 0.156,0.177 10 false *5 2.646,2.698 2.802,2.875 0.156,0.177 10 false *6
*1 Rubber Seal
*2 Starter Pinion Drive Lever
*3 Starter Communicator End Frame Assembly
*4 Starter Yoke Assembly
*5 Starter Clutch Sub-assembly
*6 Starter Drive Housing Assembly


Remove the starter commutator end frame assembly together with starter yoke assembly, starter pinion drive lever and rubber seal from the starter drive housing assembly.


c.

Remove the starter pinion drive lever from the starter clutch sub-assembly.


d.
A469397

Remove the starter commutator end frame assembly from the starter yoke assembly.

NOTICE:

While holding down the lead wire, remove the starter commutator end frame assembly.



Hide 28160 3.REMOVE STARTER ARMATURE ASSEMBLY

a.

Secure the starter armature assembly shaft in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.
A348912

Remove the brush holder insulator from the brush holder of the starter yoke assembly.


c.
A348913

Remove the 4 brush springs.

NOTICE:

Make sure the brush spring does not fly out.



d.

Remove the starter armature assembly from the vise.


e.
A352309

Remove the starter armature assembly together with starter clutch sub-assembly from the starter yoke assembly.


Hide 28011 4.REMOVE STARTER CLUTCH SUB-ASSEMBLY

a.

Secure the starter armature assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.
A348914C02
0,0 0,0 false
V100135

Move Downward


Using a screwdriver, move the stop collar toward the starter clutch sub-assembly.


c.
A348915

Using a screwdriver, pry off the snap ring.


d.
A352312C02
0.979,1.063 1.219,1.063 false 1.479,0.688 1.083,0.49 false 0.865,0.375 1.021,0.552 0.156,0.177 10 false *1 0.771,0.969 0.927,1.146 0.156,0.177 10 false *2
*1 Stop Collar
*2 Starter Clutch Sub-assembly


Remove the stop collar and starter clutch sub-assembly from the starter armature assembly.