After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
89111
1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)
|
Install in this Direction |
Engage the claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82878
2.INSTALL ECU INTEGRATION BOX LH
| *a | Temporarily Tighten |
Engage the clamp.
Temporarily install the ECU integration box LH to the instrument panel junction block assembly with the bolt.
3.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MULTIPLEX NETWORK BODY ECU
4. UPDATE ECU SECURITY KEY