1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH
Check that the LED illuminates.
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly LH) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| L3-2 (+) - L3-1 (-) | L3-2 (+) → Auxiliary battery positive (+)
L3-1 (-) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH
Check that the LED illuminates.
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly RH) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| K3-2 (+) - K3-1 (-) | K3-2 (+) → Auxiliary battery positive (+)
K3-1 (-) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly RH.