Use the same procedure for LHD and RHD vehicles.
The procedure described below is for the LHD vehicles.
Use the same procedure as for the LH and RH sides.
The procedure described below is for the LH side.
1.INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
Engage the claws to install the No. 1 interior illumination light assembly.
Connect the connector.
67656
2.INSTALL FRONT DOOR TRIM GARNISH
74232
3.INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL (for Driver Side)
74231
4.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)