81080L
1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH
Check that the LED illuminates. (for LH Side)
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly LH) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H11-2 (B) - H11-1 (E) | H11-2 (B) → Auxiliary battery positive (+)
H11-1 (E) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
Check that the LED illuminates. (for RH Side)
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly LH) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H13-2 (B) - H13-1 (E) | H13-2 (B) → Auxiliary battery positive (+)
H13-1 (E) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
81080H
2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH
Check that the LED illuminates. (for LH Side)
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly RH) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H10-2 (B) - H10-1 (E) | H10-2 (B) → Auxiliary battery positive (+)
H10-1 (E) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly RH.
Check that the LED illuminates. (for RH Side)
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly RH) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H12-2 (B) - H12-1 (E) | H12-2 (B) → Auxiliary battery positive (+)
H12-1 (E) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly RH.