Home › Vehicle Interior › HEATING / AIR CONDITIONING › REFRIGERANT LINE › 2020.07–2020.09
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0424495 REFRIGERANT LINE A

HEATING / AIR CONDITIONING  REFRIGERANT LINE  REMOVAL  


PROCEDURE

Hide 88718L 1.REMOVE PIPING CLAMP (except 1KR-FE)

a.
I115548C01
2.208,0.552 2.396,0.333 false 0.604,0.438 0.729,0.615 false 0.552,2.01 0.333,1.563 0.333,1.563 0.604,1.677 true 2.448,0.26 2.76,0.417 0.313,0.156 10 false *1 0.396,0.344 0.594,0.5 0.198,0.156 10 false *2 0.146,1.479 0.323,1.635 0.177,0.156 10 false *3 0.896,0.188 1.073,0.344 0.177,0.156 10 false *a
*1 Suction Pipe Sub-assembly
*2 Suction Hose Sub-assembly
*3 Piping Clamp
*a Press In


While pressing the end of the suction hose sub-assembly into the end of the suction pipe sub-assembly, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

NOTICE:
·

If any foreign matter is adhered to the connecting part, brush it off or use compressed air to remove it.

·

Make sure that fragments of the piping clamp do not enter the piping.




b.

Disconnect the suction hose sub-assembly.

NOTICE:

Clean off any foreign matter near the ends of the suction hose sub-assembly and suction pipe sub-assembly.



c.

Remove the 2 O-rings from the suction hose sub-assembly.

NOTICE:

Wrap the open ends of the separated suction pipe sub-assembly and suction hose sub-assembly with vinyl tape to prevent entry of moisture and foreign matter.



d.

Remove the piping clamp.


Hide 88718L 2.REMOVE PIPING CLAMP (for 1KR-FE)

a.
I115548C01
2.208,0.552 2.396,0.333 false 0.604,0.438 0.729,0.615 false 0.552,2.01 0.333,1.563 0.333,1.563 0.604,1.677 true 2.448,0.26 2.76,0.417 0.313,0.156 10 false *1 0.396,0.344 0.594,0.5 0.198,0.156 10 false *2 0.146,1.479 0.323,1.635 0.177,0.156 10 false *3 0.896,0.188 1.073,0.344 0.177,0.156 10 false *a
*1 No. 2 Air Conditioner Tube and Accessory Assembly
*2 Suction Hose Sub-assembly
*3 Piping Clamp
*a Press In


While pressing the end of the suction hose sub-assembly into the end of the No. 2 air conditioner tube and accessory assembly, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

NOTICE:
·

If any foreign matter is adhered to the connecting part, brush it off or use compressed air to remove it.

·

Make sure that fragments of the piping clamp do not enter the piping.




b.

Disconnect the suction hose sub-assembly.

NOTICE:

Clean off any foreign matter near the ends of the suction hose sub-assembly and No. 2 air conditioner tube and accessory assembly.



c.

Remove the 2 O-rings from the suction hose sub-assembly.

NOTICE:

Wrap the open ends of the separated No. 2 air conditioner tube and accessory assembly and suction hose sub-assembly with vinyl tape to prevent entry of moisture and foreign matter.



d.

Remove the piping clamp.