Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (for Manual Air Conditioning System) › from 2020.07
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0424510 AIR CONDITIONING PANEL(for Manual Air Conditioning System) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(for Manual Air Conditioning System)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The following procedure is for LHD vehicles.



PROCEDURE

Hide 55901D 1.INSTALL NO. 1 HEATER CONTROL SUB-ASSEMBLY

a.
I115630C01
1.802,0.875 2.604,0.948 2.604,0.948 1.781,0.552 true 2.646,0.896 2.958,1.052 0.313,0.156 10 false *a
*a Alignment Mark


Engage the claws to install the No. 1 heater control sub-assembly as shown in the illustration.

NOTICE:

Before installing the No. 1 heater control sub-assembly, align the alignment mark of the dial side with the alignment mark of the cable side as shown in the illustration.



Hide 55903A 2.INSTALL NO. 3 HEATER CONTROL SUB-ASSEMBLY

a.
I115631C01
1.792,0.865 2.625,0.948 2.625,0.948 1.76,0.604 true 2.677,0.917 2.99,1.073 0.313,0.156 10 false *a
*a Alignment Mark


Engage the claws to install the No. 3 heater control sub-assembly as shown in the illustration.

NOTICE:

Before installing the No. 3 heater control sub-assembly, align the alignment mark of the dial side with the alignment mark of the cable side as shown in the illustration.



Hide 55902E 3.INSTALL NO. 2 HEATER CONTROL SUB-ASSEMBLY

a.
I115765

Engage the claws to install the No. 2 heater control sub-assembly.


Hide 55406B 4.INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY

a.

for Single Layer Type:

i.

Engage the claws to install the instrument cluster finish lower center panel sub-assembly as shown in the illustration.

I116293C01
4.177,1.052 5.198,1.417 5.198,1.417 6.292,1.052 true 5.125,1.448 5.438,1.604 0.313,0.156 10 false *a
*a Alignment Mark - -


NOTICE:

Before installing the instrument cluster finish lower center panel sub-assembly, align the alignment mark of the dial side with the alignment mark of the cable side as shown in the illustration.



ii.
I116676

Engage the claws.



b.

for Double Layer Type:

i.
I116479

Engage the claws to install the instrument cluster finish lower center panel sub-assembly.



c.

for Single Layer Type:

i.

Connect the 3 connectors.



d.

for Double Layer Type:

i.

Connect the 4 connectors.



e.
I115764

Engage the clips to install the instrument cluster finish lower center panel sub-assembly.