Home › General › MAINTENANCE › FOG LIGHT BULB › from 2020.07
RM36W0E _V1 General _088300 MAINTENANCE _0432798 FOG LIGHT BULB A

MAINTENANCE  FOG LIGHT BULB  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 47749F 1.REMOVE PIN HOLD CLIP

a.
B562695C01
0.375,1.531 0.427,1.177 false 0.26,1.542 0.573,1.74 0.313,0.198 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the pin hold clip.


Hide 2.SEPARATE FRONT FENDER LINER

E452987

a.

Remove the screw to separate the front fender liner.


Hide 3.REMOVE FOG LIGHT BULB

a.
E434215

Disconnect the connector.


b.
E434216C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the fog light bulb as shown in the illustration.